Industrial Visits

Industry Visits

Academic Year

  Industry Visited

Date

Number of

Participants

2025-2026

UnistringTechnologies,Hyderabad

25/10/2025

10

 

2024-2025

 Silicon Labs, Hyderabad

18/03/2025

7

National Remote Sensing Center(NRSC), Hyderabad.

17/03/2025

46

UnistringTechnologies,Hyderabad

15/02/2025

3

Ananth Technologies Pvt. Ltd.

18/10/2024

12

2023-2024

Industrial visit to National Remote Sensing Centre (NRSC), Jeedimetla, Hyderabad

22/04/2024

17

2022-2023

Ahuja Engineering services Pvt Ltd. Hyderabad.

22/02/2023

41


Industry visit to Unistring Technologies on  25/10/2025

An industrial visit to Unistring Tech Solutions Pvt. Ltd. (UTS), Kondapur, Hyderabad, on 25th October 2025 from 10:00 AM to 1:00 PM. B.Tech and M.Tech students participated in the visit, aimed at gaining practical exposure to advanced technologies in RADAR and simulators, embedded systems, and defence communication systems.

During the visit, the UTS technical team explained their work in Electronic Warfare systems, FPGA-based design, VLSI prototyping, real-time embedded systems, and signal processing, along with demonstrations of hardware design, simulation, and testing. Students also learned the application of Verilog/VHDL, SoC design, and embedded programming in defence and aerospace systems, and gained insights into current industry trends and research challenges.

The following students under gone Industry Visits in various fields concerned to Electronics & Telematics Engineering.

Details are given below:

Academic Year  Industry Visited Date

Number of

Participants

 

2024-2025

1.    Silicon Labs, Hyderabad18/03/20257
2.    National Remote Sensing Center(NRSC), Hyderabad.17/03/202546
3.    UnistringTechnologies,Hyderabad15/02/20253
4.    Ananth Technologies Pvt. Ltd.18/10/202412

Industry Visit to Silicon Labs:

As the part of MoU with GNITS, M.Tech WMC students and A. Chandra Shaker, Asst. Professor from ETM department visited Silicon Labs located in Sattva Knowledge City, Hyderabad on 18th March, 2025. Mr. N. Venkatesh, Sr. Director of Engineering, Silicon Labs provided an engaging session of company’s work on wireless device boards and an insightful tour of their cutting-edge hardware, software, and testing facilities. This industrial visit provided WMC students with valuable industry exposure, helping them connect theoretical knowledge with real-world applications in wireless and IoT technologies.

National Remote Sensing  Center(NRSC):


Industrial visit to NRSC (National Remote Sensing center) was organized on 17/03/25 for second year students ETM department. The objective of the visit was to provide a technical exposure to the students about Indian Space technology. The event was successful, with 46  participants of ETM , including faculty members Dr. T. Sunitha Reddy and Dr. M.Vijaya Lakshmi.

The resource person effectively conveyed valuable insights on GSLV and PSLV satellites, geostationary satellites, rockets, and various launch vehicles. Students shared their feedback, highlighting the impact and insights gained from the industrial visit

Academic YearName of the EventDateNo. of Participants
2024-25Industrial visit to Silicon Labs, Hyderabad18-03-20256
Industrial visit to Unistring Tech Solutions Pvt. Ltd, Hyderabad22-02-20253
Industrial visit to Ananth Technologies Pvt. Ltd. Hyderabad16-10-20246
2023-24Industrial visit to National Remote Sensing Centre (NRSC), Jeedimetla, Hyderabad22-04-20245
2022-23Ahuja Engineering services Pvt Ltd. Hyderabad.22-02-20231

2022-23

Industrial Visit to AHUJA ENGINEERING SERVICES PVT LTD

The department of Electronics and Telematics Engineering organized a one-day industrial visit on 22 February 2023 to Ahuja Engineering services PVT LTD. for B. Tech III year ETE students, in order to gain the knowledge regarding “Waste management” as it is very essential for sustainable development. The visit was organized with the prior permission and guidance of Prof. Dr. K. Rama Linga Reddy, HOD, ETE. Dr. A. Naveena Asst. Prof., Mr. G. Krishna Reddy Assoc. Prof, & Mrs. C. Saraswathi, Lab Technician were the faculty co-ordinators for the industrial visit.

About the Industrial visit:

Ahuja Engineering Services is an engineering company that is making India’s solid waste management sector environmentally sustainable and financially viable. Their turnkey products and services offer scientific waste disposal and energy recovery solutions at different scales. The plant is capable of generating 120-150 cubic meters of biogas, the system converts vegetable and food waste to energy. The process also generates good quantities of organic manure. AES – WtE (Ahuja Engineering Services – Waste to Energy Division) offers solutions from concept of completion for setting up waste to energy plants. EPC services are provided for waste management and energy recovery in the form of direct heat, power or Bio-CNG.

Industrial Visit to NRSC-Jeedimetla

Students and Faculty coordinators at NRSC

The IETE Student Forum (ISF) unit, ECE, ETE departments of GNITS has organized an Industrial visit to “NRSC- Jeedimetla” on 29/03/2023 from 10:00AM to 3:00PM in coordination with Mr. V.V. Ganesh. A total of 106 students including 6 student coordinators of 3rd year ECE and ETE Dept accompanied by 2 faculty coordinators of ECE Dept and 1 faculty coordinator of ETE Dept had visited the NRSC.

The Industrial Visit to NRSC was conducted as a co-curricular event in order to create awareness regarding various Remote Sensing Applications and processing, Aerial Services, data dissemination, and decision support for disaster management.

The Speaker Mr. R. Srinivas, Scientist-SF gave a demo about the establishment of the NRSC and the work done by a satellite. He explained in detail about the Indian evolution in rocket launching and satellite and contribution of different ISROs towards it. Different aspects affecting the rocket launch were also discussed.

Through this industrial visit, students were able to keenly observe the backend work of the satellite and work done by the satellite.

Industrial Visit to ATC AAI- Shamshabad

Students with Resource Person in ATC control centre

Students with Faculty members at radar station

The IETE Student Forum (ISF) unit, ECE & ETE department of GNITS has organized an Industrial visit to “ATC AAI SHAMSHABAD” on 18/03/2023 and 27/03/2023 from 10:00AM to 3:00PM for 2 days. On 18/03/2023 a total of 43 students including 3 coordinators of 4th year ECE and ETE Dept accompanied by 2 faculty members of ECE Dept and 2 faculty members of ETE Dept. On 27/03/2023 a total of 53 students including 3 coordinators of 4th year ECE and ETE Dept accompanied by 3 faculty members of ECE Dept had visited the ATC AAI.

About the Industrial visit:

Industrial visit is about the work of an AAI Junior Executive (ATC), is centered around proper functioning of the Airport Traffic and Control and includes tasks such as Monitoring, maintenance of the airplanes through Installation and configuration of computer systems.

In ATC building students visited navigation room, area control room, AWS room and tower of ATC building. The working of the radar system was explained in detail by Dr. A. Ramesh Kumar , Assistant General Manager (CNS).

Through this industrial visit, students were able to keenly observe the backend work happening from the takeoff to landing of an airplane successfully.

Our Students Say

From leading successful tech startups to holding influential positions in multinational companies, GNITS graduates have consistently demonstrated leadership, innovation, and a commitment to excellence.

Placements

At GNITS, our curriculum equips students with technical expertise and soft skills, blending theory with hands-on experience to prepare graduates for the demands of the tech industry.

and many more…

Frequently Asked Questions

We offer B.Tech programs in Computer Science and Engineering (CSE), Electronics and Communication Engineering (ECE), Electrical and Electronics Engineering (EEE), Information Technology (IT), and Artificial Intelligence & Data Science (AI & DS).
Yes, GNITS offers M.Tech programs in Computer Science and Engineering (CSE), Power Electronics and Drives (PE&D), and VLSI Design.
Yes, we offer doctoral programs (Ph.D.) in various engineering disciplines, focusing on advanced research and innovation.
Our curriculum is industry-aligned, combining theoretical knowledge with practical experience through labs, projects, and internships, ensuring students are job-ready upon graduation.
GNITS has a dedicated placement cell that offers career guidance, interview preparation, and connects students with top employers in India and globally.
Alongside academic programs, we offer extracurricular activities, leadership programs, and workshops to build soft skills like communication, teamwork, and leadership.
Yes, GNITS provides access to advanced labs and research centers where students can engage in cutting-edge research in fields like AI, VLSI, and more.

What's Next ?

Enroll to the Program
Explore Campus Life
Need More Information ?